DeVilbiss DAPC Manuale dell'Operatore

NAILER/STAPLER KITOPERATOR’S MANUALSAFETY ● ASSEMBLY ● OPERATION ● MAINTENANCE ● TROUBLESHOOTING ● ESPAÑOLD24156 Rev. 0 6/11/01Read Operator’s Ma

10 - EngD24156READ THIS MANUAL AND UNDERSTAND ALL SAFETY WARNINGS ANDINSTRUCTIONS BEFORE OPERATING TOOL.OPERATING THE TOOL1. Add one drop of DeVilbis

11 - EngD24156CLEARING A JAM FROM THE TOOLDisconnect tool from air supply before adjusting, clearing jams,servicing, relocating or during non-operatio

For Brad Nailer1. Disconnect tool from air hose. 2. Release the magazine latch to openthe magazine.3. Remove fasteners from magazine.4. Remove the thr

13 - EngD24156TROUBLESHOOTINGPROBLEMCAUSECORRECTIONFasteners are not the correctsize.See specification andfastener sections for correctfastener inform

14 - EngD24156STAPLER/BRAD NAILER KIT ANK20NarrowCrownStaplersFasteners1/4" NPTInlet Plug(AC100)3mm & 4 mmAllenWrenchesSafety GlassesStaplerL

15 - EngD24156FASTENERSFasteners for the brad nailer fit and interchange with fasteners for the followingbrands of guns:2by4, Stanley-Bostitch, Senco,

16 - EngD24156LIMITED WARRANTYAll merchandise manufactured by DeVilbiss Air Power Company Manufacturing is warranted to be freeof defects in workmansh

2 - EngD24156TABLE OF CONTENTSSAFETY GUIDELINES - DEFINITIONSIndicates animminently hazardoussituation which, if not avoided, willresult in death or

3 - EngD24156IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT IN SERIOUSINJURY AND PROPERTY DAMAGE. READ AND UNDERSTAND ALL WARNINGS AND

4 - EngD24156HAZARDWHAT COULD HAPPEN HOW TO PREVENT ITRISK OF INJURY• Tools left unattended, or withthe air hose attached can be activated by unauthor

5 - EngD24156Fasteners could ricochet or bepropelled causing serious injury orproperty damage.Never point discharge of tool at selfor others.Do not pu

1. Disconnect the air supply from the tool before manually lubricating.2. Turn the tool so the air inlet isfacing up and put one drop ofDeVilbiss Air

7 - EngD24156IMPORTANT: Always connect the quick connect body to the air hose. Neverconnect the quick connect body to the tool.NOTE: Excessive oil wi

8 - EngD24156OPERATING A CONTACT TRIP TOOL:1. Requires finger to be off the trigger and the nose of the Tool to be placedon the work surface.2. The co

6. Hold the tool clear of the work surface. The contact trip safety mechanismshould return to its original down position. Pull the trigger. The tool m